3D Pro multilayer dental zirconia blocks Flyin the best dental
zirconia discs materials for CAD/CAM system Lab
Flyin 3D Pro multilayer zirconia block has 6 layers of gradient
color, bending strength and translucency. We can copy natural
teeth's color, strength and translucency to the utmost. It is the
best materal for your market following the trend with high
strength, excellent permeability and color aesthetic repairing
restoration, which is suitable for all CAD/CAM and manual system.
Our dental zirconia blocks/blanks are compatible with different
brands of CAD/CAM system and manual system, such as Zircon system,
sirona Inlab system, Kavo system, Amann Girrbach system, and
Porland system, etc.
Product Description
| Model | 3D Pro Multilayer zirconia block |
| Type | Multilayer |
| Translucency | 43%~57% |
| Bending strength | 700Mpa~1200Mpa |
| Advantage | Superior performance, excellentquality, both excellent
transparencyand strength, the most commonmaterial.
|
Zirconia Block Introduction
Flyin zirconia block has high strength, excellent permeability and
color aesthetic repair effect that suitable for CAD/CAM system and
manual system.
Product Features
Safety:No irritation,No corrosion,Good bio-compatibility
Beauty:Natural teeth color can be reproduced
Comfortability:Low thermal conductivity,hot and cold changes do not
stimulte the pulp
Durability:Over 1600MPa perturbed strength, durable and useful
♠ 6 layers Multilayer color
♠ From 43% to 57% gradient for transparency
♠ Strength shows gradient from 700 Mpa to 1200 Mpa
♠ Suitable for anterior, crown, 7 unit bridges and all restoration
Indications:
Crown, Inlay, Onlay, 2-5 unit Bridges, Anterior
| Physical Characteristics |
| Sintered density 6.07±0.01g/cm³ |
| Bending Strength 700-1050 MPa |
| Transmittance 43-57% |
| Hardness 1400HV |
Sintering temperature 1480~1550℃/recommend 1500℃ |
Product Description:
FLYIN 3D Pro multilayer zirconia block is the most high end class
zirconia block, the most nature zirconia block, which changes
color(from dark to light) , strength( from 700mpa-1200mpa), and
translucency(43%-57%) gradually from cervical to incisal part at
one zirconia block.
This multilayer zirconia block can make both posterior teeth and
anterior teeth. One zirconia block to cover all indications.
Our zirconia blocks are compatible with different kinds of CAD/CAM
system and manual system, such as Cercon system, Sirona Inlab
system, KaVo system, Wieland system and Amann Girrbach AG system.
We choose the best zirconia powder and utilize a cold isostatic
pressing system to form shapes,the main advantage of isostatic
pressing is the uniform application of pressure, which lead to a
very homogeneous density and shrinkage,yielding a very reproducible
process.The production cost by using isostatic pressing is much
higher than uniaxel dry pressing, but quality is also much
higher.We try to provide high quality ,low cost zirconia blocks for
all dental CAD/CAM milling system, support open architecture
CAD/CAM milling system. We will sell lowest price on zirconia
blocks and highest quality to all labs worldwide.
Technical Parameters:
| Product Attributes | 3D pro multilayer Zirconia Block |
| Product Name | Hybrid Ceramic Blocks, Dental Zirconia Blocks |
| Color | multilayer |
| Chemical Solubility | <100 μg/cm² |
| Vickers Hardness | >1200 HV |
| Sintering Temperature | 1500℃ |
| Radioactivity | Low |
| Size | D98mm |
| Flexural Strength | 700-1200 MPa |
| Translucency | 43-57% |
| Indications | 5-7 unit bridges, full arch abutment ,implant bridge etc. |
| Thickness | D98mm |
Applications:
Company
Flyin Dental Supply is located in Shenzhen China.Our Zirconia
Blocks/Discs are widely used for CAD/CAM milling systems, covering
Cercon,Wieland,Zirkon zahn, Kavo, Sirona, Amann Girrbach, Schutz,
etc.
We believe that the success of our customer and partner is also
oursuccess.
